Data Protector User Discussions
cancel

DB properties not appear

Highlighted
mla Contributor.
Contributor.

DB properties not appear

Hi, DP 09.00 build 88.

in event log:

[138:742] Backup session "2019/01/03-2" of the backup specification "Full_Backup",backup group "Default" has errors: 1.

Description:
Errors have been detected during the backup, copy, or consolidation session.

Actions:
Check error messages of the session by using:
* Data Protector GUI (Internal Database context)
* Session Errors report
* omnidb -session <sessionID> -report

when under Backup node and right click on DB and then Properites, nothing comes up.

Is it normal?

I am just replacing somebody, not a guru in Data protector and trying to find a problem of failed job.

See please screenshot... I guess when I will access properties of the job I should see some prob description..

Thx.

7 REPLIES
Micro Focus Expert
Micro Focus Expert

Re: DB properties not appear

Hello @mla

To see the errors you will need to go to Internal Database and check the session. You can do filters so search only for one specific backup specification. 

image.png

 

If you have an specific error open a case or add it here to help you. 

Regards, 

Andres Fallas Salazar
Customer Support Engineer

If you find that this or any other post resolves your issue, please be sure to mark it as an accepted solution.
If you are satisfied with anyone’s response please remember to give them a KUDOS by clicking on the STAR at the bottom left of the post and show your appreciation.
mla Contributor.
Contributor.

Re: DB properties not appear

thanks for answering... see plz screenshots

Micro Focus Expert
Micro Focus Expert

Re: DB properties not appear

Hi @mla

Run the following command:

omnidb -session <session_id> -report >session.txt

Where session_id is the session number.

Please attach the complete session.

Best Regards

mla Contributor.
Contributor.

Re: DB properties not appear

here we go...

so easy (when you know how :) )

The message is clear:

--- Cannot open device ([1112] No media in drive. ) ----

what it really means? the operator changes tapes daily.

So or drive is gone or what you will say... what will be next step? to run some utility for checking drive health?

THANKS!

here is the whole file content:

[Normal] From: BSM@xcelera "Full_Backup"  Time: 04/01/2019 20:00:05
 Backup session 2019/01/04-2 started.

[Normal] From: BMA@xcelera "HP:Ultrium 6-SCSI"  Time: 04/01/2019 20:00:06
 STARTING Media Agent "HP:Ultrium 6-SCSI"

[Major] From: BMA@xcelera "HP:Ultrium 6-SCSI"  Time: 04/01/2019 20:00:07
[90:54]   scsi1:2:1:0C
 Cannot open device ([1112] No media in drive. )

[Normal] From: BMA@xcelera "HP:Ultrium 6-SCSI"  Time: 04/01/2019 20:00:07
 ABORTED Media Agent "HP:Ultrium 6-SCSI"

[Critical] From: BSM@xcelera "Full_Backup"  Time: 04/01/2019 20:01:14
 None of the Disk Agents completed successfully.
 Session has failed.

[Normal] From: BSM@xcelera "Full_Backup"  Time: 04/01/2019 20:01:14

 Backup Statistics:
         
  Session Queuing Time (hours)         0.00       
  -------------------------------------------     
  Completed Disk Agents ........          0         
  Failed Disk Agents ...........          5         
  Aborted Disk Agents ..........          0         
  -------------------------------------------     
  Disk Agents Total  ...........          5         
  ===========================================     
  Completed Media Agents .......          0         
  Failed Media Agents ..........          1         
  Aborted Media Agents .........          0         
  -------------------------------------------     
  Media Agents Total  ..........          1         
  ===========================================     
  Mbytes Total .................       0 MB       
  Used Media Total .............          0         
  Disk Agent Errors Total ......          0   

 

 

 

 

Micro Focus Expert
Micro Focus Expert

Re: DB properties not appear

Hello @mla

I was able to reproduce the error on my lab: 

[Major] From: BMA@server.domain "Drive_Test" Time: 7/1/2019 09:50:24
[90:54] Tape0:1:0:1:0C
Cannot open device ([1112] No media in drive. )

Is your drive HP:Ultrium 6-SCSI a standalone device? 

If so, you will need to move a tape manually to the device before start the backup. 

Regards, 

Andres Fallas Salazar
Customer Support Engineer

If you find that this or any other post resolves your issue, please be sure to mark it as an accepted solution.
If you are satisfied with anyone’s response please remember to give them a KUDOS by clicking on the STAR at the bottom left of the post and show your appreciation.
mla Contributor.
Contributor.

Re: DB properties not appear

Hi,

yes it is standalone device on W2008.

The operator change a tape manually 5 days a week.

So they slide a tape in...

For me the message No media in Drive, means one thing the drive is not able to read a tape.

It is = drive is dead or something else.

Do you agree with my point? If not what you can suggest?

Thx.

Micro Focus Expert
Micro Focus Expert

Re: DB properties not appear

Hello @mla

If I move a tape to my drive I was able to run the backup with no problem. 

But you can try this: 

  • Make sure that one tape is in the device. 
  • Run: TapeAnalyser -device scsi1:2:1:0C-verify -header

The command should be run on the Media Agent (xcelera)

This command test the tape you have on the device. If this command does not receive answer could be because the drive is not in a good state. If so, then contact hardware team to check it. 

Regards, 

Andres Fallas Salazar
Customer Support Engineer

If you find that this or any other post resolves your issue, please be sure to mark it as an accepted solution.
If you are satisfied with anyone’s response please remember to give them a KUDOS by clicking on the STAR at the bottom left of the post and show your appreciation.